Bienvenue aux nouveaux arrivants sur FantasPic !
- Pensez à lire les règles durant votre visite, il n'y en a pas beaucoup, mais encore faut-il les respecter .
- N’hésitez pas à faire des remarques et/ou suggestions sur le Forum, dans le but de l'améliorer et de rendre vos prochaines visites plus agréables.
- Vous pouvez regarder votre "panneau de l'utilisateur" afin de configurer vos préférences.
- Un passage par "l'utilisation du forum" est recommandé pour connaître les fonctionnalités du forum.
--- L’équipe FantasPic ---
- Pensez à lire les règles durant votre visite, il n'y en a pas beaucoup, mais encore faut-il les respecter .
- N’hésitez pas à faire des remarques et/ou suggestions sur le Forum, dans le but de l'améliorer et de rendre vos prochaines visites plus agréables.
- Vous pouvez regarder votre "panneau de l'utilisateur" afin de configurer vos préférences.
- Un passage par "l'utilisation du forum" est recommandé pour connaître les fonctionnalités du forum.
--- L’équipe FantasPic ---
Modérateur : Jérémy
I have a doubt about Eusarts or Uart.
Hello to every one,
I would have a doubt about Eusarts, I would like to know if I can connect uart device with pick euart ports.
1) I won't take the PIC16(L)F15325 much. It have 2x heart, in datasheet is reported only Rx1 and tx 1 and not rx2 and tx2 can I have some explanation of this , please?
2) I would like to know if I can use the eusart ports to connect all uart modules like Bluetooth Hc-6 and other tx-rx uart modules, can I do it?
Thank you for your reply.
3) i tryed to read PIC16(L)F15325 model , this mother use 3x osccon register (osccon1..2..3), is there some other pic mcu simply to set who have 18 or 20 pins and have more memory flash and sram (example 14kb flash and 1kb sram) ?
I would have a doubt about Eusarts, I would like to know if I can connect uart device with pick euart ports.
1) I won't take the PIC16(L)F15325 much. It have 2x heart, in datasheet is reported only Rx1 and tx 1 and not rx2 and tx2 can I have some explanation of this , please?
2) I would like to know if I can use the eusart ports to connect all uart modules like Bluetooth Hc-6 and other tx-rx uart modules, can I do it?
Thank you for your reply.
3) i tryed to read PIC16(L)F15325 model , this mother use 3x osccon register (osccon1..2..3), is there some other pic mcu simply to set who have 18 or 20 pins and have more memory flash and sram (example 14kb flash and 1kb sram) ?
Modifié en dernier par leo73 le ven. 7 août 2020 17:09, modifié 3 fois.
I have a doubt about Eusarts or Uart.
I have a doubt about Eusarts or Uart.
I have a doubt about Eusarts or Uart.
Hello Leo73
Bluetooth devices work with a standard UART, or a USART in asynchronous mode, and of course also with a EUSART.
An EUSART is an extended USART. Depending on the type of pic, they have additional functions like serial speed automatic detection.
Some of these functions are used to drive other serial standards like LIN, DMX, DALI (automotive and lighting).
the Pic 16F15325 is a recent model with PPS (Peripheral Pin Select) and a more powerful clock, and therefore effectively more difficult to start, but it is feasible, and we can help you. You can use Microchip MCC to get a code example.
It has 2 EUSART, each with its own UART and PPS registers.
For the uart it is better to use a quartz, to have an accurate speed.
https://www.microchip.com/maps/microcontroller.aspx
Using MAPS and selecting 8-bit PIC MCU - 18/20 pins - 14KB - 1k - 2 uarts, we get the 16F15345 only. Perhaps it is possible to get better results.
Les modules Bluetooth fonctionnent avec un UART standard, ou un USART en mode asynchrône, et bien sûr aussi avec un EUSART.
Un EUSART est un USART étendu. Ils ont selon le type de pic des fonctions additionnelles comme la détection auto de vitesse série.
Certaines de ces fonctions sont utilisées pour piloter d'autres normes série comme LIN, DMX, DALI (automobile et éclairage)
Le Pic 16F15325 est un modèle récent avec PPS (Peripheral Pin Select) et une horloge plus performante, et donc effectivement plus difficile à démarrer, mais c'est faisable, et on peut t'aider. Avec Microchip MCC tu peux récupérer un exemple de code.
Il possède 2 EUSART, chacun d'eux avec ses propres registres UART et PPS.
Pour l'uart il vaut mieux utiliser un quartz, pour avoir une vitesse précise.
En utilisant MAPS et en sélectionnant 8-bit PIC MCU - 18/20 pins - 14KB - 1k - 2 uarts, on obtient que le 16F15345, mais c'est à approfondir.
Bluetooth devices work with a standard UART, or a USART in asynchronous mode, and of course also with a EUSART.
An EUSART is an extended USART. Depending on the type of pic, they have additional functions like serial speed automatic detection.
Some of these functions are used to drive other serial standards like LIN, DMX, DALI (automotive and lighting).
the Pic 16F15325 is a recent model with PPS (Peripheral Pin Select) and a more powerful clock, and therefore effectively more difficult to start, but it is feasible, and we can help you. You can use Microchip MCC to get a code example.
It has 2 EUSART, each with its own UART and PPS registers.
For the uart it is better to use a quartz, to have an accurate speed.
https://www.microchip.com/maps/microcontroller.aspx
Using MAPS and selecting 8-bit PIC MCU - 18/20 pins - 14KB - 1k - 2 uarts, we get the 16F15345 only. Perhaps it is possible to get better results.
Les modules Bluetooth fonctionnent avec un UART standard, ou un USART en mode asynchrône, et bien sûr aussi avec un EUSART.
Un EUSART est un USART étendu. Ils ont selon le type de pic des fonctions additionnelles comme la détection auto de vitesse série.
Certaines de ces fonctions sont utilisées pour piloter d'autres normes série comme LIN, DMX, DALI (automobile et éclairage)
Le Pic 16F15325 est un modèle récent avec PPS (Peripheral Pin Select) et une horloge plus performante, et donc effectivement plus difficile à démarrer, mais c'est faisable, et on peut t'aider. Avec Microchip MCC tu peux récupérer un exemple de code.
Il possède 2 EUSART, chacun d'eux avec ses propres registres UART et PPS.
Pour l'uart il vaut mieux utiliser un quartz, pour avoir une vitesse précise.
En utilisant MAPS et en sélectionnant 8-bit PIC MCU - 18/20 pins - 14KB - 1k - 2 uarts, on obtient que le 16F15345, mais c'est à approfondir.
I have a doubt about Eusarts or Uart.
Retourner vers « Généralités sur les PICs »
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 54 invités